鋼筋桁架

普通型鋼筋桁架樓承板
Normal Type Rebar-truss Floor Bearing Slab

■鴻路鋼筋桁架樓承板是將樓板中的鋼筋在工廠加工成鋼筋桁架，并將鋼筋桁架與鍍鋅壓型鋼板焊接成一體的組合樓板。
■Honglu rebar-truss floor bearing slab is a composite slab in which the rebars in  floor slabs are manufactured into rebar-truss in factory,and these trusses are welded with galvanized profiled steel sheets.


鋼筋桁架樓承板規格：576和600型
Size:Type 576&600



■為什么模板寬度是576(600)mm，鋪到上面后是566(590)mm?
■ Why is the width of mold 576(600)mm,but 566(590)mm after laying?
答:576(600)mm是鋼筋桁架版出廠時的寬度，包含搭接扣。由于模板兩邊的搭接扣寬度是10mm，鋪設后搭扣重合，故每塊板應減少10mm，稱為566(590)mm。
A:576(600)mm is the width of the rebar-truss slab just leaving factory,including the lap buckles.Since the width of the lap buckles on both sides of the mold is 10mm,the buckles are overlapped after laying,so each slab should be reduced 10mm,becoming 566(590)mm.

鋼筋桁架樓承板優勢及成品
Advantages and Products

1、受力模式合理、樓板整體性能優越，施工便捷、環保，工期有保證；
     The force mode is reasonable,the overall performance of the slab is superior,the construction is convenient,environmental,and the project period is guaranteed;
2、板底平整、凈高有保證，抗震性能好；
     The bottom of the slab is flat,so the net height is guaranteed,and the anti-seismic performance is good;
3、鋼筋間距及混凝土保護層厚度有保證；
     Rebars' spacing and concrete cover thickness are guaranteed;
4、鍍鋅板不參與受力、無需防火及防腐涂料，即安全又經濟；
     Galvanized sheets are without stress,and  no need fire-proof and anti-corrosion coatings,safe and economical;
5、雙向板施工簡便，適用于大跨度樓板；
     Construction of two-way slab is simple,which is suitable for large-span floor slabs;
6、鋼板鍍鋅層合理、栓釘焊接質量可靠、端部無需穿透焊。
     The zinc coating of the steel plate is reasonable,the quality of the stud welding is reliable,and the end part does not need peneration weld.
7、鋼筋桁架樓承板可在坡屋面中應用，發揮無需支撐，無需綁扎受力鋼筋，施工無難度。
     The rebar-truss floor bearing slab can be applied in the slope roof ,no  need supports,no need tying stressed rebars,no difficulty in construction.




生產設備及車間展示
Equipments and Manufacture line

     鋼筋桁架焊接成型機集盤條原料放線、鋼筋矯直、彎曲成型、自動焊接、定尺切斷有成品數控輸送的全自動化生產線。
    Rebar-truss welding&forming machine is a fully automated production line with wire-rod raw material releasing,rebar straightening,bending forming,automatic welding,fixed length cutting and CNC conveying of  products.
    模板焊接設備現場智化焊自動輸送,該設備可自動一次性成型長度為1-12米鋼筋桁架承板壓板機設備自動進料,數控輸送及切斷,一次成型。
    The mold welding equipment is intelligent welding and automatically conveying at site.It can automatically form a 1 to 12-meter rebar-truss floor bearing slab one-time,and the press machine has material automatically fed,CNC conveyed and cut,finishing forming one-time.










M型鋼筋桁架樓承板
Type-M Rebar-truss Floor Bearing Slab


■由鴻路自主研發的新型產品--M型鋼筋桁架樓承板，現已榮獲專利（專利號：201620139299.3）。且成功拿下重大工程建設：蘭州·名城廣場項目，共計9萬多平方。
■The new product independently researched and developed by Honglu——Type-M rebar-truss floor bearing slab has been patented(patent number:201620139299.3).And Honglu successfully won the major project construction:Lanzhou·Mingcheng Square project,total more than 90,000 ㎡.



產品細節展示
Product Details



優點 Advantages：
底模不宜焊穿，避免出現焊點，產生銹點；
The bottom die should not be melted through to avoid solder spots and rust spots;
無焊點，底部美觀，平整；
No solder spots,bottom is beautiful and flat;
避免出現漏漿；
Avoid concrete leakage;
雙折邊卡扣，扣合更加緊密。
Double-folded buckle for tighter closure.


鴻路M型鋼筋桁架樓承板 （正面）
HL Type-M Rebar-truss Floor Bearing Slab(Front)

鴻路M型鋼筋桁架樓承板 （背面）
HL Type-M Rebar-truss Floor Bearing Slab(Back)

鴻路M型鋼筋桁架樓承板 （局部）
HL Type-M Rebar-truss Floor Bearing Slab(Part)

鋼筋桁架樓承板應用領域
Applied Areas